Taking out the trash, although not particularly pleasant, is an essential and fairly simple chore. However, the task can quickly become messy if the waste is not handled properly. So, using the right trash bags and waste bins in the right way is important to avoid leakage and odor in the home. So, to make the chore seamless, one may want to avoid the following mistakes while using trash bags at home: 1. Choosing the wrong size Opting for trash bags that are the same size as the garbage can might seem like the obvious choice, but it can be a mistake. For starters, if there is too much waste in the bag, the contents will slip out of the bag and accumulate at the bottom of the can. So, one should always choose a bag that is slightly larger than the can, so that it can be easily folded along the edges of the can. 2. Not securing the bag Even if one uses a large-sized trash bag, it can still slip off the edge of the can if one throws trash with force into the bag or if there is too much garbage in the bag. With the bag slipping off the edge, it will make a mess when one tries to take the trash out.

Plumbing is an important aspect of home maintenance, and it typically involves pipes, fixtures, and fittings that ensure water supply, heating, and sanitation. Over time, plumbing can be affected by minor and major plumbing issues, like leaky faucets or clogged drains. Here, while DIY (do-it-yourself) is often a cost-effective approach, certain mistakes associated with DIY can lead to further expenses or damage. Here are some of those mistakes and how to avoid them: 1. Ignoring minor leaks A small leak may seem inconsequential at first as it does not majorly affect the water supply, but over time, it can breed mold and even cause water damage. To avoid this, one should address the source of the leak as soon as possible and take necessary actions to fix it. Usually, minor leaks are brought on by worn-out washers or seals, which can be fixed by replacing faulty pipes or using pipe tapes. 2. Not turning off water While fixing a plumbing-related issue, DIYers, in an attempt to get the job done quickly, may forget to turn off the main supply of water. So, the water may continue to flow and flood the area where repairs are being undertaken. So, one should shut off the valve before taking on any repair project.

Spray foam installation is important to maintain an energy-efficient home that regulates indoor temperature and lowers utility bills in the long run. It provides great insulation and thermal performance. However, all these benefits are only possible if there are no mistakes made when the spray foam insulation is being installed. If the installation is not done correctly, one can not get the desired results. Therefore, it’s essential to keep an eye out for common mistakes. Using substandard material There are various quality of spray foams available, and they are not all the same. When opting for low-quality spray foam products, it can have difficulty adhering to the surface. Moreover, if there are any issues with moisture levels, it can lead to mold and mildew growth later on. Not using the layered approach When installing spray foam insulation, it is important to remember to work evenly, quickly, and in a controlled manner. One of the common mistakes people make is not installing the spray foam in layers. It is crucial to allow each layer time to expand and cool before installing another layer. Failing to do so could lead to suboptimal thickness or expansion of each layer, which may impact the effectiveness of the foam insulation and result in high energy costs in the long run.

Doors and windows not only give the house an aesthetic appeal but also protect it against external factors such as weather conditions, dust, sunlight, and intruders. They also give peace of mind, a sense of security, and privacy to the home dwellers. It’s important to maintain them regularly to ensure their longevity and functionality. However, there are some common mistakes that people make during maintenance, which can end up causing problems. Not inspecting the frame regularly Keep an eye out for any wear and tear on the window or door frame. Certain signs show it needs maintenance. Some common signs to look for are paint peeling off, warping, cracks or splits, difficulty opening or closing the door or window, loose or missing screws, and more. If the frame is wooden, check if it has become warped or brittle due to sun damage. With the glass wall structure of double or triple-paned windows, moisture can get stuck between panes and reduce its effectiveness. Seasonal weather change also affects the frame structure. Forgetting about seals Seals ensure that the windows and doors remain energy efficient, so it’s important to check their functionality regularly. If there are any issues with the seals, it can hike energy bills as warm or cold air may escape and lead the heater or air conditioner to use more energy.

The need for sustainability and building sustainable habits keeps growing. As consumers, it is their responsibility to make environmentally conscious purchase decisions, such as buying products that have a low impact on the environment. Many eco-friendly alternatives are available for products that are used at home. Studies also suggest that consumers are willing to spend more on eco-friendly products if it means safety for those living at home and the environment. Here are a few eco-friendly products that one can use at home: 1. Refillable bottles Refillable bottles can store drinking water and cleaning solutions, like homemade detergents and shampoos. Refillable spray bottles are also quite popular. This is mostly because many people want to make their own cleaning solutions, as they are affordable, sustainable, and not filled with chemicals that can harm one’s health when used in excess. Refillable bottles ensure that one does not have to run to the grocery store every two weeks to buy a product packaged in a flimsy, disposable plastic bottle. Plastic bottles are disposed of after a single use and find themselves in landfills. 2. Reusable silicone bags Many people use plastic bags to store their produce in the fridge. Sometimes, they also wrap the leftover food or fresh meat to be stored away in the freezer.

Every aspect of a home requires attention and care from time to time. This involves not just keeping the home and its fixtures and furniture clean but also ensuring that no issues affect the home’s functionality. For instance, doors and windows are used extensively and can undergo considerable wear and tear. If one notices any issues in their functionality, one should see if they can be fixed with repairs. If not, one should consider replacement. Warning signs 1. Jammed hinges When the doors and windows take on excessive wear and tear, the hinges may get rusty, and the frames can be hard to move. So, whenever one goes to open or close doors and windows, they may have to use a lot of strength to make them move. While this could be fixed with repairs and maintenance, sometimes, the hardware can be beyond repair and needs to be replaced. 2. Draft If the door or window can no longer keep cold air out, then it could be a sign it needs some repairs. While it may not seem like an urgent problem, drafty homes can mean higher energy bills. Good windows and doors ensure energy efficiency by keeping harsh weather at bay and regulating indoor temperature.

Renovating a garden is a time-consuming yet rewarding task. Planning the task and timeline and researching are important to ensure the space looks beautiful. A DIY garden renovation project can be fun; however, being aware of all the limitations or rookie mistakes that can be avoided is necessary since certain factors can seem minor but significantly affect the look and feel of the garden. So, here are some garden renovation mistakes to avoid. Using complicated patterns while planting the garden Planting plants and flowers in an intricate pattern and shapes is a mistake that can easily be avoided. While these shapes may look aesthetically pleasing, it may get challenging to maintain these patterns over time. In fact, when not maintained properly, the plants will look messy and haphazard, which will become an eyesore over time. Using only small solar-powered lights While it may seem eco-friendly to highlight the trees and the garden in the evening using solar-powered lights, there may be better options. In most cases, these small lights are not powerful enough to light up the area, and one may have to use extra lights to achieve the desired look. If the lights don’t function properly, they will eventually end up in the landfill, which negates their whole purpose of being environmentally friendly.